Constitutive Modeling and Simulation of Energy Absorbing Polyurethane Foam Under Impact Loading
The compressive-stress strain response of polyurethane foam under uniaxial compressive impact loading has been studied. The development of a uniaxial constitutive model from strain rate...
Use of Hierarchical Lattices for Predicting the Fluid or Stress Transfer in Concrete
Hierarchical lattices are used to study the influence of local disorder on the transfer of properties (stresses, strains, permeability) from the micro-scale to the macro-scale. They are...
On a Micromechanical Basis of Stochastic Constitutive Laws
A procedure for derivation of stochastic constitutive laws is outlined on the basis of graph-representable linear elastic microstructures. Central to the procedure is the concept of a...
Nonisothermal Viscoplasticity
A nonisothermal theory of viscoplasticity is formulated for a medium subjected to finite deformation. The basic system of equations consists of the laws of conservation of linear and angular...
Neural Network Modeling of the Mechanical Behavior of Sand
Given a set of triaxial test data, an artificial neural network (ANN) has been trained to model the mechanical behavior of a medium-to-fine sand. Once trained, the ANN was tested by simulating...
Numerical Integration of Transient Creep Constitutive Equations for Polycrystalline Ice
A numerical time integration algorithm is developed to solved the system of coupled, first-order differential equations characterizing the physically-based constitutive model of Shyam...
Probabilistic Micromechanics in Constitutive Modeling of Granular Material
This paper gives a review of newly developed probabilistic methods for analysis of the effect of randomness in geometry and physical properties at the microscale on their macroscale response...
Constitutive Modeling for Material with Perfect Disordered Heterogeneity
Finite element analysis with large number of elements are performed to simulate perfect disordered heterogenous material. The probabilistic nature of the micromechanical behavior of the...
Nonlinear Analysis of Strain-Softening Damage under Monotonic and Cyclic Loading
The paper reviews the modeling of damage by the microplane model and presents extensions required for cyclic loading. The general microplane constitutive model is implemented in a three-dimensional...
Applications of Viscoelastic Damper to Jointed Structures for Seismic Mitigation
Some structures, such as dams, are built with contraction joints that might carry some small tensile stresses. Such joints are expected to open and close during an earthquake. That will...
An Evaluation Study of Modified Mohr-Coulomb and Cap Models
Two failure criteria, namely Mohr-Coulomb and cap models, are considered in this paper with some modifications. Mohr-Coulomb theory is applied to concrete after stress and strain cut-offs...
Stochastic Mixed Finite Difference Method
Some aspects of numerical solutions of stochastic mechanics problems are considered. The Finite Difference method for discretization of stochastic continuous media problems is discussed....
A Cumulative Failure Criterion of Concrete Under Uniaxial Dynamic Compressive Loading
It has been previously reported that the strength and critical strain of concrete under impact increase with strain rate, but neither of them can predict failure. A cumulative damage parameter...
Mechanical Properties of High Performance Concretes
This paper presents some of the initial results of a 4-year research project on mechanical properties of high performance concretes with particular reference to highway applications. High...
Constitutive Modeling of Slurry Infiltrated Fiber Concrete (SIFCON)
Slurry Infiltrated Fiber CONcrete (SIFCON) is a unique material, containing 5 to 18 percent, by volume, of steel fibers; in contrast, standard Fiber Reinforced Concrete (FRC) usually contains...
Modeling Bond Stress-Slip of Reinforcing Bars Embedded in SIFCON
A brief description is given of the mechanisms associated with the bond shear stress versus slip response of deformed reinforcing bars embedded in slurry infiltrated fiber concrete (SIFCON)....
Granular Flow on a Bumpy Inclined Chute
Theoretical predictions for steady, uniform granular flows of identical, smooth, nearly elastic disks and spheres on bumpy inclined chutes are obtained. Kinetic constitutive theory is...
Serviceability Analysis of Wood Beams with Creep
The effect of creep deformations on the serviceability reliability of single, dimension lumber wood beams is examined. A viscoelastic stress-strain relationship is used to model the time-dependent...
Probabilistic Particle-Related Constitutive Model for Clayey Material
Particle-related (microscopic) soil modeling has attracted attention of research community in recent years, because of complication and shortcoming associated with inelastic macroscopic...
Fabric Related Probabilistic Model for Granular Materials
A new anisotropic noncoaxial incremental constitutive model for granular materials (Jahedi et al., 1990) was developed, in which a Fabric reconstruction factor '?+',...
Return to search